Mr. Liu, a post-1980s drifter working and living in Beijing, has mixed feelings: he is happy that he finally settled down in Beijing after years of hard work, but he is worried that even though his new house with newly purchased furniture has been ventilated for two months, there is still some pungent smell in the room, and whether this will affect his pregnant wife?
With this doubt, Mr. Liu invited an indoor pollution control institution for testing. After comparing the air indicators in environments with and without furniture, the inspectors confirmed that the pungent odor was emitted from the furniture Mr. Liu bought. Nowadays, such incidents are not uncommon in home renovation. Furniture and building materials have become one of the issues people pay attention to in home decoration because of "excessive formaldehyde content".
The problem of excessive formaldehyde in furniture is serious
A random inspection result of furniture products released by Shanghai Municipal Bureau of Quality and Technical Supervision in November last year shows that among 156 batches of sampled products, 51 batches are unqualified, and many unqualified furniture products are related to "formaldehyde emission not meeting the standard". Not long before that, Shaanxi Provincial Bureau of Quality and Technical Supervision announced the quality supervision and spot check results of furniture products in the second quarter of this year. Among 95 batches of products sampled from 95 manufacturing and distribution enterprises, 19 batches of samples are unqualified after testing. Apart from non-compliance of metal material requirements and drawer slide strength with standards, all other existing problems are related to excessive formaldehyde.
According to China's testing standard for formaldehyde content in furniture, the formaldehyde emission should not exceed 1.5mg/L. However, a brief comparison of these unqualified sampled products makes it easy to find that the formaldehyde emission of some products is 2 times the limit at the lowest, and more than 5 times the limit at the highest.
Analysts say the main reason for the increasingly serious problem of excessive formaldehyde in furniture is: most panel furniture in China uses bonded fiberboard or particleboard, and in the production and assembly process of these materials as furniture raw materials, aldehyde adhesives are required for bonding. For example, many panel furniture will use an adhesive called "urea-formaldehyde resin" in the production process. From a chemical perspective, urea-formaldehyde resin is a direct compound of formaldehyde and urea. This product will undergo organic "decomposition reaction" under natural conditions and release formaldehyde. If exposed to a humid and hot environment, it is just like adding a "catalyst", the decomposition speed will double, and the formaldehyde odor that can be smelled will naturally be stronger.
There are a large number of small enterprises in the home furnishing industry. Apart from having weak control over product standards such as raw materials and wantonly using unqualified particleboard and low-quality adhesives, insiders generally believe that another main reason for the repeated prohibition of excessive formaldehyde in the industry is that China's existing detection method is highly "destructive", which makes it difficult to perform detection on furniture.
The current detection method is highly "destructive"
Mr. Liu mentioned above told the author that after finding out the problem with the furniture, he once asked the merchant for a return, but the merchant refused, and instead claimed that a certain amount of formaldehyde can play a antiseptic role for furniture. As for whether the formaldehyde exceeds the standard, he hoped Mr. Liu could send the furniture to a professional testing institution designated by the state for inspection. If the formaldehyde does exceed the standard, exchange can be done.
"It's no problem to pay the testing fee, but it's really not cost-effective to cut this furniture that cost tens of thousands of yuan into pieces for testing. If the rights protection fails, the cost will be too high." Helplessly, Mr. Liu had to give up the inspection.
A survey shows that at present, among complaints about home furnishing products, the number of complaints about panel furniture has been among the top for many consecutive years. In particular, "excessive formaldehyde" is an unspeakable pain for consumers and has become a stubborn problem in the furniture industry. But for a long time, due to the difficulty in operating the current furniture detection method in China, the success rate of consumers' rights protection is not high, and most of the time consumers have to plead with merchants to protect their rights!
The current furniture detection method adopted in China is the "desiccator method", and the general process is as follows: generally, plate samples are first taken from the furniture product, and then sent to a laboratory above the provincial level for chemical detection. It is worth noting that when taking plate samples, the integrity of the furniture will inevitably be damaged. This method of cutting the furniture into small pieces for testing not only generates certain costs, but also makes it difficult to guarantee smooth exchange or refund even if the test result shows excessive formaldehyde, because many merchants will refuse to compensate consumers on the grounds that "the furniture product has been damaged".
"Environmental test chamber method" is worth learning from
Compared with the domestic "plate sampling detection method" that costs the integrity of furniture, some European and American countries have already implemented the "environmental test chamber method". The specific operation of this detection method is: place a single piece of furniture in a "closed air chamber" first, and after a certain period of time, extract "air samples" from the chamber for detection.
The main differences between this detection method and the currently used method in China are as follows: First, it does not damage the structural integrity of the furniture product, which is conducive to subsequent rights protection; Second, placing the furniture in a "closed air chamber" for detection is equivalent to simulating the use environment of the furniture, and the detection result will be more convincing. Third, on the premise of not damaging the inspected product, the cost generated by the "environmental test chamber method" is lower than that of the "plate sampling detection method".
In addition to the great difference in detection methods from the United States, China's regulatory standards for formaldehyde emission from furniture still need to be standardized and improved. It is understood that in the world today, the United States has the strictest control over "formaldehyde emission detection of furniture". In 2009, the United States issued the CARB Regulation, which made detailed specifications for all links of furniture production, and even penetrated the detection of formaldehyde into every link of the circulation of furniture products, rather than just limited to spot checks on "finished furniture".
On the contrary, looking at China's existing regulatory standards for "formaldehyde content", the limit of formaldehyde content in the "Indoor Air Quality Standard" is less than or equal to 0.10mg per cubic meter, while the qualified standard of formaldehyde content in the "Limit of Harmful Substances in Wooden Furniture for Interior Decoration Materials" is less than or equal to 1.5mg per liter. Relevant experts say that the inconsistency of the two standards leads to the inconsistency between the qualified formaldehyde content of furniture and the formaldehyde content in the air. As a result, sometimes the detection result violates one standard but conforms to the other, and merchants will use this as a reason to refuse exchange and return.
Consumers need to master some basic common sense when buying furniture
The new standard will be introduced soon, which is undoubtedly an exciting good news for consumers. But it is still very necessary for consumers to master some basic common sense when buying furniture.
There is a saying in the industry that consumers should purchase carefully when encountering the following situations when buying furniture: 1. The furniture has a strong pungent odor; 2. Sold in non-regular stores without quality inspection certificate; 3. The produced furniture products have been on the blacklist of national and local quality inspection departments for many times; 4. Panel furniture is not edge-sealed; 5. Cannot provide formaldehyde content description; 6. OEM production with an unreasonably low price; 7. Incomplete after-sales warranty.
Professionals believe that the quality of indoor air quality is closely related to the health of family members. In addition to common methods such as activated carbon adsorption, opening doors and windows for natural air circulation, placing green plants indoors, and purchasing air purifiers, it is better to invite a professional testing institution to conduct "indoor air quality testing" before moving in, and it is advisable to move in only after the air quality meets the standard.